No products in the cart.
Iron-on patch not sticking? Here are the mistakes to avoid 🔥
You have a iron-on patch that doesn't stick Despite your best efforts? Rest assured, it's a common problem, but it's preventable. In this guide, you'll discover the most common mistakes to avoid, as well as simple tips to ensure a successful installation. 💡
1. An iron-on patch that doesn't stick to an ill-fitting fabric ❌
Often, a patch won't stick because the fabric isn't right for it. Synthetic materials like nylon or fabrics that are too smooth can prevent the glue from sticking.
✅ Tip: favors natural textiles such as cotton, denim or canvas. Our patches DIPatch are tested on organic cotton for optimal hold.
2. Iron-on patch not sticking? Check the iron temperature 🔥
Too low a temperature is a common cause of failure. That's why it's essential to use an iron that's hot enough to activate the glue.
✅ Recommendation: “cotton” position, without steam, 30 to 40 seconds of firm pressure is sufficient in the majority of cases.
3. Lack of protective fabric during installation 🧻
It's tempting to iron directly onto the patch, but this can damage it. Additionally, the glue could be exposed to too much direct heat.
✅ Tip: Always use a thin cloth or baking paper between your iron and the patch. This protects your design while ensuring a good fusion.
4. Poorly prepared surface = iron-on patch that doesn't stick 💧
If your fabric is damp, dusty, or wrinkled, your patch won't stick properly. This detail is often overlooked.
✅ Always check that your textile is clean, dry and well stretched. This ensures better adhesion of the glue.
5. Sticking a patch without respecting the cooling time ❄️
After application, the patch must be allowed to cool without touching it. However, this is a step that many people skip, which weakens its hold.
✅ Precaution: Wait at least 2 minutes after application before handling the garment. This will give the glue time to harden.
What if your iron-on patch still doesn't stick? 🧷
You did everything right but your iron-on patch does not hold despite everything? The problem may come from the quality of the patch or its glue.
That's why at DIPatch, we use a tested and hand-applied hot melt adhesive. You can also send us your visual to receive a sturdy, ready-to-use embroidered patch 💪.
📚 To go further, discover this Complete guide to iron-on patches.
